1/2/4/6/8pcs P-134 VU Meter High-precision Power Amplifier Head DB Level Meter DAC Audio Power Sound Pressure Meter w/Backlight

1/2/4/6/8pcs P-134 VU Meter High-precision Power Amplifier Head DB Level Meter DAC Audio Power Sound Pressure Meter w/Backlight


1/2/4/6/8pcs P-134 VU Meter High-precision Power Amplifier Head DB Level Meter DAC Audio Power Sound Pressure Meter w/Backlight

Cheap Amplifier, Buy Quality Consumer Electronics Directly from China Suppliers:1/2/4/6/8pcs P 134 VU Meter High precision Power Amplifier Head DB Level Meter DAC Audio Power Sound Pressure Meter w/BacklightEnjoy ✓Free Shipping Worldwide! ✓Limited Time Sale ✓Easy Return.


Price: US $37.40 US $52.68 (Discount 29%)
Rating: 5.0 / 5.0 (100.0%) from 1 Reviews
Sold : 2
Stock : 4998
Wishlist : 1
Color : 1pc P-134, 2pc P-134, 4pc P-134, 6pc P-134, 8pc P-134

Get it Now

Specification

Brand Name : Olive Leaf
Maximum Power Per Channel : NO POWER
Model Number : P-134 VU Meter


Description

P-134 VU Meter High-precision Power Amplifier Head DB Level Meter DAC Audio Power Sound Pressure Meter with Backlight

Parameters:

● Pointers Material: Nickel silver strips● Pointer color: orange● The direction of the pointer swing: left to right● Pointer length: 70 ± 1 mm from the center axis to the needle end● Pointer width: 0.45 ± 0.05 mm

Features:

● Standard test conditions temperature: 20 ℃, humidity 70% . Can also be tested under normal temperature and humidity.● The influenza degree pointer at the zero scale to the maximum scale sensitivity of 1000 uA ± 10% (full scale position)● Internal impedance :100 Ω ± 10%● Insulation impedance meter outside the box plus the electrical circuit with 500V DC plus 50M ohm meter shell● Electrical insulation of the circuit impedance is 500V DC voltage test of the insulation value. Pointer to overlap with the zero-scale tolerance of ± 1mm balanced meter using a standard position and tilt 90 degrees to allow the error range of ± 1mm● Pointer to mount the current instant plus three times the full scale current, and slowly reduced to the the electric influenza degree 1/2 reading,● The pointer will return to the scale plate within 1/3 scale friction meter coupled with the current, and slowly increase or decrease to a certain value, indicating the point of error range of ± 1mm,● Brake instantly plus scale plate 2/3 of the current value of the pointer indicates the location of the time required for a second or less.

Special Test:

● Tests on each interval of five seconds to ten times the full scale current input overload, the action is repeated nine times for each time of 0.5 seconds .After this test, 7-14 to maintain normal.● Vibration test meter packaged in the vibration plate 1,000 times per minute, up and down 4mm shock In each direction for 10 minutes. After this test 7-14 to maintain normal impact test meter packaged 30-cm height of fall in 3cm thick wooden board, XYZ three-direction test.After this test, 7-14 to maintain normal reliability test the current input of 100,000 calibration points within the limits of current sense is still the standard environmental impact test temperature of 50 ° C, humidity 85%, for 100 hours, after this test 7-14 to maintain normal.● Terminal pull test: terminals must withstand one kilogram tension, sustained 60 seconds will not be affected.

Others:

● Using the temperature limits: -10 ℃ to +60 ℃ RH 35 to 85%● Storage temperature limits: -20 ℃ to +60 ℃ RH 35 to 85%●  ----- Do not use the meter in direct sunlight, and PUT the meter in the box to avoid foreign matter into the meter internal.● Soldering Condition terminal about 3 mm placed in the temperature of 230 ℃ tin plate, placed 3.5 seconds.● After this test, 7-14 to maintain normal,● Hand-held soldering gun to solder temperature 350 ℃, the terminal contact for 3.5 seconds, the terminal front-end of about 3mm contact with the solder gun.● After this test, 7-14 to maintain normal,● Anti-static test in the same direction three times, to characterize the difference between the pointer in the length of the scale in a transparent cover surface to dry nylon 1/3 back to the zero position.● Bulb size: 4 blue LED backlighting, parallel to the PCB (3.0-3.2V 80mA)

Backlight to 12V Voltage Divider Resistor Connection Method:

Package include:

P-134 VU Meter


Store Info

Store Name : JOJOHIFI Store
Country Name : China
Follower : 392
Open Time : Dec 24, 2019
Opened Year : 1
Province :
Positive Review : 481 (100.0%)


Reviews

5 Stars : 1 (1%)
4 Stars : 0 (0%)
3 Stars : 0 (0%)
2 Stars : 0 (0%)
1 Stars : 0 (0%)

Get it Now
Share on Google Plus

About Admin

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment